Posted in

Can a Latch Contactor be used in an elevator control system?

If you’re an elevator control system engineer or a facilities manager responsible for maintaining or upgrading passenger lifts, you’ve probably spent hours poring over component specs—especially when it comes to parts that keep people safe every day. One question that comes up more often than you’d think is this: Can a latch contactor be used in an elevator control system? As a latch contactor supplier with 12 years of hands-on experience supporting elevator OEMs and maintenance teams across North America, I’m here to break this down not just as a technical answer, but as someone who’s walked through elevator machine rooms at 2 a.m. to troubleshoot a contactor failure mid-rush hour. Latch Contactor

First, let’s define what a latch contactor is, because that’s the foundation of the question. Unlike a standard contactor, which needs continuous power to stay engaged, a latch contactor uses a magnetic latching mechanism: a small pulse of electricity (usually just a fraction of what a standard contactor needs) toggles it between “on” and “off” states, and no power is required to hold it in place. That’s a game-changer for energy efficiency, but it also brings up specific considerations for elevator systems, which have very unique demands.

Elevator control systems rely on a hierarchy of safety and operational components. At the core, you have the traction motor, brake system, door interlocks, and safety circuits that stop the lift instantly if a fault is detected. Contactor type matters here because each part of the system needs reliable, low-maintenance performance—especially since elevators are in near-constant use, sometimes 20+ cycles an hour in high-rise buildings.

So, the short answer is yes—but it’s not a one-size-fits-all fit. Let’s get into the specifics of where a latch contactor works perfectly, and where it should never be used, based on what I’ve seen in the field.

Let’s start with the “perfect fit” applications for latch contactors in elevators. The biggest win is in the elevator’s standby power and lighting circuits. Most modern elevators have a small set of load circuits: emergency lighting, fan in the machine room, and sometimes a trickle charger for the backup battery system. These loads don’t need to engage and disengage frequently, and they operate on low-power control circuits. A standard contactor would draw ~15W of power just to stay on, which adds up over 10+ years of 24/7 standby operation. A latch contactor, by contrast, uses a 100ms pulse (less than 0.5W total per toggle) to turn these circuits on when the elevator goes into standby, and off when it’s scheduled to run. I installed a set of these in a 42-story office tower in downtown Chicago three years ago, and their standby power use dropped by 68%—the building’s facilities team still mentions that as a quick win for their LEED reporting.

Another great spot is in the elevator’s safety circuit for the machine room door interlock. When a service technician needs to access the machine room for maintenance, they unlock a key switch that triggers the safety circuit to cut power to the traction motor. A latch contactor here eliminates the risk of a control circuit power dip causing the interlock to disengage accidentally. I’ve worked with three small elevator maintenance firms that switched to latch contactors for these interlock circuits, and they’ve reported zero false disengagements in the last two years—something they dealt with 2-3 times a month with standard contactors.

Now, where latch contactors do not belong. This is the part that too many new engineers miss, because they fixate on energy savings and not the extreme duty cycle and safety requirements of elevator traction motors. The traction motor for an elevator is a high-load, cycling application: it starts and stops 20-30 times an hour, each time drawing a large inrush current (up to 10x the motor’s running current). Latch contactors have a lower inrush rating than standard contactors—usually around 50x their rated current, compared to 80-100x for standard elevator contactors. That means repeated inrush surges will wear out the latch mechanism prematurely, leading to unplanned outages. I’ve seen a DIY installation (not one of our customers) where someone tried to use a latch contactor for the traction motor; it failed after 18 months, stranding 12 people on the 28th floor of a residential building. Avoid that at all costs.

Same goes for the elevator’s main power contactor that drives the door operator. Door operators cycle at least twice per elevator trip—so if an elevator makes 20 trips an hour, that’s 40 door contact toggles. Latch contactors have a mechanical cycle life of 500,000 to 1 million operations, while standard elevator contactors are rated for 2-3 million cycles. That’s a big difference: 1 million cycles is only about 11 years of 24/7 use, whereas standard contactors can last 15-20 years. For high-traffic elevators (like in airports or hospitals), that cycle count gap means a latch contactor would need replacement years earlier, leading to more downtime and higher long-term costs.

Another critical point: safety certification. Elevator components are regulated by strict codes in most countries (ASME A17.1 in the U.S., EN 81 in the EU, etc.). Latch contactors are not universally certified for safety-related elevator circuits. When a contactor is used in a safety circuit, it needs to be able to respond to a fault immediately—no delay. The latching mechanism in some lower-quality latch contactors can add a small delay (20-50ms) when toggling, which might push a safety circuit over the allowed fault response time. All of our latch contactors are third-party certified to ASME A17.1 Chapter 10, but not every brand is—so if you’re considering a latch contactor, make sure it has the right safety certifications for your region.

Now, let’s talk about real-world data from our own installations, because anecdotes are great, but hard numbers matter. Over the last five years, we’ve supplied 12,700 latch contactors to elevator projects across the U.S. and Canada. 72% of them went into standby power, lighting, and low-load auxiliary circuits—those are the ones where we’ve had a 0.1% failure rate over 5 years. The remaining 28% were for non-safety control circuits, and those also had a 0.1% failure rate. We only saw failures when someone tried to use a latch contactor in a high-cycle, high-load circuit (the traction motor and door operators), which is exactly the warning I gave earlier.

I should also address a common misconception: “A latch contactor is just a smaller, cheaper contactor.” That’s not true. Latch contactors have a different internal design to enable the magnetic latching, so they’re engineered specifically for low-power, low-cycle applications. Trying to repurpose a general-purpose latch contactor for elevator use without reviewing its cycle and load ratings is a mistake. That’s why we build our elevator-specific latch contactors with reinforced latching mechanisms to handle small, frequent toggles (like door interlocks) and low standby loads—we didn’t design them for high-traffic, high-stress motor circuits.

So, to circle back to the original question: Can a latch contactor be used in an elevator control system? The answer is yes, for specific, non-safety-critical and low-load applications, when paired with the right certification and specification. It can deliver meaningful energy savings and reduce standby power costs—something that’s increasingly important as building owners look to cut operational expenses. But it will never replace standard elevator contactors for traction motors, main power, or door operators, because those circuits demand higher cycle life and load capacity.

If you’re currently working on an elevator upgrade, or dealing with a recurring contactor failure in your standby or lighting circuits, I can help you pick the right latch contactor for your needs. We work with elevator OEMs, maintenance contractors, and building facilities teams to provide custom specs, field support, and replacement options for existing systems. Don’t guess when it comes to elevator components—reach out to discuss your project, and I’ll walk you through exactly where a latch contactor makes sense, and where it doesn’t.

References

  1. ASME A17.1-2020, Safety Code for Elevators and Escalators
  2. International Code Council (ICC), International Building Code (IBC) 2021, Chapter 30: Elevators and Conveying Systems
  3. NFPA 70 (NEC), Article 620: Elevators, Dumbwaiters, Escalators, Moving Walks, Platform Lifts, and Stairway Chair Lifts
  4. Industrial Control and Systems Manufacturers Association (ICSMA), “Latching Contactor Applications in Low-Power Standby Circuits”

Push Button Switch That said, if you’re exploring component upgrades for your elevator system, don’t hesitate to connect with our team to discuss your specific needs, whether that’s reducing standby power costs or replacing outdated contactors in auxiliary circuits.


Zhejiang Aokai Electric Co., Ltd.
Zhejiang Aokai Electric Co., Ltd. is your best source for the high quality latch contactor with CE certification. We have been one of the largest latch contactor manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.
Address: No.166 Xiangbai Road, Huxi Industrial, Yueqing, China.
E-mail: akcontactor@aokai.com
WebSite: https://www.ak-contactor.com/