Hey there, gearheads and procurement pros—if you’ve ever stared at a planetary gear assembly (the tiny, spinning wonder in everything from your pickup truck’s transmission to a warehouse forklift) and thought, “Wait, how much do these actual parts weigh?” you’re in the right place. I’ve been selling planetary gear parts for over 12 years, and let me tell you—this isn’t a “one size fits all” question. Most people think planetary gears are just a set of toothy circles, but the weight of each part (sun gear, planet gears, carrier, ring gear, pins, bearings) depends on so many factors: material, size, load capacity, even the application it’s built for. Today, I’m breaking this down like I do with every new customer who calls our shop—straight, no fluff, real-world numbers that actually matter when you’re placing an order. Planetary Gear Parts

First, let’s start with the basics to get everyone on the same page. A planetary gear set (sometimes called an epicyclic gear set) has four core parts, right? The sun gear in the center, 3 or more planet gears that spin around it, a carrier that holds those planets like a little cage, and the outer ring gear (internal teeth, not external like normal gears). Then you’ve got the small stuff—hardened pins that hold the planets in the carrier, needle bearings that reduce friction, maybe a couple of retaining clips. All of these add up, and each part’s weight is non-negotiable to get right. If a planet gear’s too heavy, it’ll cause unnecessary wear on the carrier; if the ring gear’s underweight, it’ll crack under heavy load. That’s why we don’t just cut metal and ship it—we calculate every ounce before it leaves our warehouse.
Let’s dive into the part-by-part weights, using the most common applications first because that’s what 90% of our customers order. I’m talking about light-duty planetary gear parts for things like power tools, small ATVs, and light industrial conveyors, then medium-duty for construction forklifts and farm equipment, and finally heavy-duty for mining trucks and wind turbines. No jargon, just real numbers from our order logs.
Starting with the SUN GEAR—this is the centerpiece, right? For light-duty use, we usually make sun gears from case-hardened steel (it’s tough, resists chipping) with a module (that’s the gear tooth size measurement) of 1.5 to 2 mm. A typical light-duty sun gear here weighs between 0.08 lbs and 0.2 lbs. Wait, that’s like a small bag of coffee beans—tiny, right? Medium-duty sun gears are bigger, module 3 to 4 mm, and made from stronger alloy steel (4140, mostly, because it’s flexible under torque). Those run 0.5 lbs to 1.2 lbs. Now heavy-duty—we’re talking module 8 to 12 mm for mining and wind, sun gears forged from high-strength chrome-moly steel. Those will clock in between 4 lbs and 12 lbs. Crazy how much a big sun gear can weigh, right? And yeah, size directly ties to load—if you need a sun gear to handle 10,000 ft-lbs of torque, it can’t be the same size as one for a 50 ft-lbs power drill.
Next up: the PLANET GEARS. These are the little ones that spin around the sun gear, and there’s always more than one (3 is standard, 4 if it’s high-load). Light-duty planet gears: same case-hardened steel as the sun, module 1.5-2 mm, each one is 0.05 lbs to 0.12 lbs. So if you’ve got 3 of them, that’s 0.15 to 0.36 lbs total—super light, perfect for a cordless drill. Medium-duty planet gears: module 3-4 mm, alloy steel, each 0.3 lbs to 0.8 lbs. 4 of these add up to 1.2 lbs to 3.2 lbs, which is why they work for a forklift’s drive system. Heavy-duty planet gears—forged chrome-moly, module 8-12 mm, each 2 lbs to 6 lbs. 4 of these? 8 lbs to 24 lbs just in planet gears. I once shipped a set of these for a mining haul truck, and each planet was so heavy one guy couldn’t lift it alone—you have to crank them to get the torque right.
Then we have the CARRIER. This is the cage that holds all the planet gears and the pins, so it’s the biggest part of the set usually. Light-duty carrier: cast iron (cheaper for small loads) or aluminum if weight is a top priority (like for RC cars or drones). The cast iron ones are 0.2 lbs to 0.4 lbs; aluminum carriers are a bit lighter, 0.15 lbs to 0.3 lbs. Medium-duty carriers are usually ductile iron (stronger than cast iron, doesn’t crack as easy) or forged steel. Those weigh 1.2 lbs to 3.5 lbs. Heavy-duty carriers—forged steel, sometimes with a heat-treated surface for extra durability—run 8 lbs to 22 lbs. I remember a customer who builds custom wind turbines told us he swapped his old steel carrier for a lighter aluminum one to reduce overall weight, and it saved him 15 lbs on the whole assembly—huge for wind, because lighter parts mean less stress on the tower.
Ring gear time: the big outer one with internal teeth. Light-duty ring gears: pressed steel (affordable for small stuff) or molded composite (super light for things like small garden equipment). Pressed steel is 0.3 lbs to 0.6 lbs; composite is even less, 0.1 lbs to 0.2 lbs. Medium-duty ring gears are either forged steel or cast iron, weighing 1.5 lbs to 4 lbs. Heavy-duty ring gears—forged alloy steel, sometimes bolted to the final drive housing—run 10 lbs to 28 lbs. Last year, we did a bulk order of these for farm tractors, and each ring was so thick you could barely drill through the teeth with a standard drill bit.
And let’s not forget the tiny, easy-to-overlook parts: the PINS and BEARINGS. These add up, trust me. Light-duty pins are 0.02 lbs to 0.05 lbs each, bearings 0.01 lbs to 0.03 lbs each. For 3 planets, that’s like 0.09 lbs of pins and bearings total—no big deal, but it’s part of the full assembly weight. Medium-duty pins are 0.1 lbs to 0.3 lbs each, bearings 0.05 lbs to 0.1 lbs—for 4 planets, that’s 0.6 lbs to 1.6 lbs. Heavy-duty pins? We’re talking 1 lb to 3 lbs each, bearings 0.5 lbs to 1.5 lbs—for 4 planets, that’s 6 lbs to 18 lbs. Yeah, those tiny parts add more weight than you’d think.
Now, here’s the thing—all these numbers are ballpark, and we adjust them based on customer needs. For example, if a customer needs a lightweight planetary gear set for a mobile robot, we’ll swap out steel carriers for aluminum, use composite ring gears, and even go with thinner planet gears (as long as they handle the load) to cut weight. If a customer needs ultra-heavy-duty parts for a rock crusher, we’ll go with thicker, forged steel for every part, no aluminum or composite, even if it adds a few pounds.
I get questions all the time: “Can you make a planet gear that’s lighter than 0.05 lbs but still works for a drill?” The short answer is no—because if you make it too light, it’ll bend under torque and crack. Material is another big factor: titanium is lighter than steel, but way more expensive, so most customers only use it for aerospace or high-end performance parts. Aluminum is lighter than iron, but not as strong, so it’s for light loads only.
Let’s talk about a real example to make this concrete. Last quarter, we shipped a complete planetary gear set for a small electric scooter motor. Let’s break the weight down: sun gear (0.12 lbs), 3 planet gears (0.08 lbs each, so 0.24 lbs), carrier (0.18 lbs aluminum), ring gear (0.25 lbs pressed steel), plus pins and bearings (0.07 lbs). Total set weight: 0.86 lbs. That’s less than a pound—no wonder electric scooters are so light. Another example: a forklift planetary set. Sun gear (0.8 lbs), 4 planet gears (0.5 lbs each, 2 lbs total), ductile iron carrier (2.2 lbs), cast iron ring gear (3 lbs), pins and bearings (1 lb). Total: 9 lbs. That makes sense for a forklift, which needs heavy parts to lift tons. And the big one: a wind turbine planetary set. Sun gear (8 lbs), 4 planet gears (4 lbs each, 16 lbs total), forged steel carrier (15 lbs), forged ring gear (22 lbs), pins and bearings (12 lbs). Total: 73 lbs. That’s a solid 70-pound gear set, built to last 20+ years in wind and weather.
Now, why does this weight matter to you, the buyer? If you’re assembling a machine, every pound counts—too heavy and you use more fuel/electricity, wear parts out faster. If you’re replacing a broken part, you need the exact weight to match the rest of your assembly, otherwise it’ll throw off the balance and cause vibrations (bad vibrations can break parts or make noise like crazy). We once had a customer who bought a cheap planet gear from another supplier that was 0.1 lbs lighter than our standard one—his forklift shook so bad on the highway he had to turn back. Turned out the cheap gear was made from thin steel, couldn’t handle the load, and the light weight threw off the whole carrier balance. That’s why we test every part’s weight in our lab before it ships—no guesswork.
Another thing we do here at our shop: we provide custom weight specs for every order, no extra charge. If you need a set that’s exactly 1.5 lbs total, we can adjust the material and size to hit that number without sacrificing strength. We keep track of every material’s density (steel is ~0.28 lbs per cubic inch, aluminum is ~0.1 lbs per cubic inch, titanium ~0.16 lbs) so we can calculate weight down to the ounce for any part.
I should also mention that weight isn’t the only factor for performance. Material hardness, gear tooth count, module, and heat treatment matter way more, but weight is a quick way to tell if a part is built right. If a “heavy-duty” planet gear is the same weight as a light-duty one, it’s not actually heavy-duty—they cut corners on material or thickness. That’s the red flag to look for when buying planetary gear parts.
Here’s a pro tip from 12 years in the game: when you’re getting quotes for planetary gear parts, ask the supplier for the weight of each individual part, not just the whole assembly. If they won’t give you that, they’re probably cutting corners. We list every part’s weight on our packing slip, along with material specs and load capacity—transparency is huge for us.
If you’re here because you’re working on a project, replacing a broken gear, or sourcing parts for a new product, and you need exact weight numbers for your application, reach out. We don’t do generic, we build parts that fit your needs, no matter how small or big your order is. Whether you need one planet gear for a repair or 1,000 sets for a new line of construction equipment, we can give you accurate weight specs, custom adjustments, and parts that last. Don’t settle for guesswork—get actual numbers from a supplier that’s been doing this long enough to know what works.

When it comes to planetary gear part weights, there’s no magic number—only real, application-based numbers that depend on material, size, load, and your specific needs. We use the numbers I laid out today as a starting point, then tweak them to make sure every part works for you, no exceptions. If you’ve got questions about a specific part, want a custom spec, or need to order, just connect with us—we’re here to help.
Planetary Gear Parts References:
- Shigley, J. E., & Mischke, C. R. (2001). Standard Handbook of Machine Design (3rd ed.). McGraw-Hill.
- NASA. (2018). Design Guidelines for Planetary Gear Systems for Aerospace Applications. National Aeronautics and Space Administration.
- American Gear Manufacturers Association. (2020). AGMA Standard 925-A03: Planetary Gear Units. American Gear Manufacturers Association.
- Budinski, K. G. (2010). Engineering Materials: Properties and Selection (8th ed.). Pearson.
- Society of Automotive Engineers. (2019). SAE J1100: Vehicle Dynamics Terminology (relevant section on component weight distribution).
Jiangsu Zhengfang Dynamics Technology Co., Ltd.
As one of the most professional planetary gear parts manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to buy customized planetary gear parts made in China here from our factory. Contact us for pricelist.
Address: Building 3, No. 69 Feitian Avenue, Jiangning District, Nanjing City, Jiangsu Province
E-mail: hanks.liu@zfdynamics.com
WebSite: https://www.zhengfangdongli.com/