Posted in

What is the best way to store pool spa equipment during the off – season?

Hey there, pool and spa lovers! If you’re like most folks who’ve had their share of fun under the sun or cozy evenings by the hot tub, you know the off-season doesn’t mean your equipment gets a free pass to collect dust and fend for itself. As someone who’s been in the pool spa equipment game for years—working with everything from filter pumps to chlorine feeders, skimmers to jet assemblies—I’ve seen first-hand what happens when off-season storage is an afterthought. Last year, a regular customer brought in a 2-year-old sand filter that he’d stuffed in his garage all winter, and it was so clogged with mold and dried-up debris that he ended up needing a whole new unit. That’s the exact kind of mistake we’re here to help you avoid. So, let’s cut through the jargon and break down the best way to store your pool spa gear when the temps drop and the pool cover goes on. Pool Spa Equipment

First things first: prep work is non-negotiable. Skipping this step is like putting a wet towel in a closet—mold, mildew, and rust will show up faster than you can say “off-season.” Let’s start with pool equipment, since that’s what most of us prioritize, but a lot of this applies to spa gear too. For pumps, filters, and heaters, you’ve got to drain every last drop of water. I’ve seen guys just open the drain valve and call it a day, but that leaves residual water in hoses, pump impellers, and filter housing. Even a tiny bit can freeze and expand, cracking plastic or metal parts. So, disconnect all hoses, remove the pump housing, and tip it upside down for 10 minutes to let any leftover water escape. If you have a sand or DE filter, backwash it twice, then rinse it until the water runs clear—if there’s old chemicals left in the filter, they’ll eat away at the media over the winter. And don’t forget to clean the skimmer and pump baskets—those little bits of leaves and grass get wet, turn to gunk, and attract critters like spiders and mice who love to nest in warm gear.

Spa equipment has its own quirks. Jacuzzis and hot tub pumps have smaller, more delicate parts, so extra care here is key. Drain the spa completely, then fill it with fresh water and a tiny bit of spa cleaner (not harsh chlorine—too much can corrode seals) to run the jets for 15 minutes. That flushes out any built-up biofilm from the pipes. Then drain it again, dry every surface with a microfiber cloth, and leave the spa cover off for a day to air out. For jet nozzles, if they’re removable, take them out, soak them in warm, soapy water to get rid of mineral buildup, and let them dry completely before storing.

Now, once everything’s prepped, how do you actually store it? Your garage might seem like the easiest spot, but it’s not always the best. If your garage gets freezing temps (like 32°F or below), metal parts will rust, plastic will become brittle and crack. If it’s super humid, mold will grow. So, here’s the lowdown on storage spots: if you have a climate-controlled storage unit, that’s perfect—temp stays between 50-70°F, humidity low, no temperature swings. But if you’re storing at home, pick a corner that’s not against exterior walls (those get cold), off the floor (so no water leaks from the ceiling get on it), and away from direct sunlight (UV rays break down plastic hoses and seals over time). I also recommend using a pallet or old wooden crates to lift equipment off the ground—even a small spill in your garage can turn into a big mess if it sits under your filter.

How you organize your gear matters too. Don’t just stack hoses on top of each other—kinks and bends in PVC hoses can weaken them, and if there’s any leftover water inside, those bends become breeding grounds for mold. Coil hoses loosely, tie them with a soft rope (not wire, that can scratch plastic) and hang them on wall hooks or lay them flat on a shelf. For larger items like pool pumps and filter cartridges, wrap them in a breathable cover—old bed sheets work great, or we sell heavy-duty equipment covers that let air circulate but keep dust out. Avoid plastic covers, they trap moisture and cause mildew. And don’t forget small parts! Skimmer gaskets, O-rings, jet accessories—stuff those in sealed plastic bags with a little silica gel packet (you know, the ones in shoe boxes or electronics) to absorb any moisture, then label them so you don’t spend spring hunting for a replacement O-ring.

One thing I get asked all the time: should I leave the equipment assembled or take it apart? It depends on the size and how much space you have. Smaller parts, like cartridge filters or pump impellers, are easier to store if taken apart, but larger items like a single-speed pool pump are better left assembled. If you do take things apart, keep all hardware (screws, bolts, clips) in labeled bags. I once had a customer lose the small screws for his pump housing, and he spent three days running to hardware stores trying to match them—don’t be that guy.

Also, a quick note on chemicals—most pool folks know not to store chlorine or pH adjusters in the same spot as equipment, but I still see it all the time. Chemicals can corrode metal and eat through plastic, so store them in a cool, dry area away from your gear. And if you’re storing leftover pool chemicals for next season, make sure they’re in their original, sealed containers and never mix different types.

Wait, what about if you have a above-ground pool? The equipment for those is a bit different. The frame pumps and cartridge filters are smaller, so you can take them apart, drain all water, and store them in a tote with a lid (breathable, not airtight) in a cool, dry spot. Just make sure you dry every part thoroughly inside the tote before closing it—even a tiny damp spot can turn into a mold problem by March.

Let me throw in a real story to drive this home. Last winter, a customer named Mike stored his pool filter in his unheated backyard shed. He didn’t drain it properly, so the leftover water froze and cracked the filter’s housing. By the time spring rolled around, he had to buy a whole new filter, which cost him twice what it would have cost if he’d just drained it right. Another customer, Sarah, took the time to prep her spa jets, let all her hoses air out, and stored her gear in a climate-controlled closet in her basement. When spring came, her equipment was good as new—no mold, no rust, no issues. That’s the difference between a little off-season prep and a costly mistake.

Now, a few pro tips from someone who’s been doing this for years. First, do a quick check-in in mid-winter. If you’re storing gear at home, pop into the storage spot once a month to make sure there’s no moisture buildup, no critters have chewed through hoses, no dust has settled too thick. A quick wipe down is all it takes to prevent bigger issues. Second, if you’re short on space, we sell stackable equipment storage bins that are designed to fit pool pumps and filters—way better than cramming stuff in a random tote. Third, for spa covers, if you’re removing them for storage, roll them loosely (don’t fold them, that creases the vinyl and can cause tears) and store them flat or hanging vertically, not on the floor. Folded spa covers get permanent creases that let water seep in when you put them back on.

Water House At the end of the day, the best way to store your pool spa equipment off-season is to treat it like the investment it is. Most of this gear costs a pretty penny, so why cut corners and replace it every year? A couple hours of prep, a smart storage spot, and a little organization can make your equipment last 2-3 years longer, which saves you money in the long run. And if you’re not sure how to prep a specific piece of gear—maybe you’ve got a fancy saltwater generator or a high-efficiency spa pump—hit us up! We’re not just a supplier, we’re guys who’ve been in the trenches, helping customers get the most out of their pool and spa gear. We can walk you through every step, answer any questions, or even hook you up with the right storage supplies you need. No stuffy sales pitches, just straight talk from people who know pools and spas inside and out. Don’t wait until spring when you’re in a panic because your filter’s moldy—reach out now, and we’ll make sure your gear is ready to go when the weather warms up.

References

  1. National Swimming Pool Foundation. (2022). Off-Season Equipment Storage & Maintenance. NSPF Pool Industry Best Practices Guidelines.
  2. American Spa & Pool Association. (2023). Pro Tips for Storing Pool and Spa Components During Winter. ASCA Consumer Maintenance Series.
  3. Outdoor Power Equipment Institute. (2021). Storing Water-Cooled Equipment for Cold Weather. OPEI Cold-Weather Storage Recommendations.

Guangzhou Qiaoyi Water Treatment Technology Co., Ltd.

Address: Floor 6th, Building 2, No. 3, Ketai 1st Road, Baiyun District, Guangzhou 510445, Guangdong Province, China
E-mail: Hygool@hygool.com
WebSite: https://www.hygool.com/