If you work with carbide materials (whether for cutting tools, industrial components, or wear parts), you already know how critical their hardness is to performance. Carbide—usually a mix of tungsten carbide and a metallic binder like cobalt—isn’t a one-size-fits-all material. Its hardness varies based on grain size, binder content, and even how it’s sintered. Test it wrong, and you might reject a perfect batch or miss a flaw that would lead to part failure. That’s why micro hardness testing is the go-to method here, and if you’re not doing it right, you’re wasting time and money. Micro Hardness Tester

Let’s start with the basics: micro hardness vs. regular hardness tests. Regular tests (like Rockwell or Brinell) use a much bigger indenter and apply way more force—usually kilograms, not grams. Carbide is super hard, but it’s also brittle, and if you use too much force, you’ll crush the grain structure instead of measuring just the tiny volume you need. Micro hardness targets a tiny, localized area—think just a few micrometers across—so you can test individual carbide grains, the binder phase, or a thin surface coating on a carbide part. That’s the difference between guessing and getting actual data that matters.
I’m a micro hardness tester supplier, so I’ve talked to dozens of machinists and quality managers who get tripped up on the setup, not the machine itself. Let’s walk through the steps that actually work for carbide, no fluff.
First, prep your sample correctly. Skip the “sandwich it between two other parts” shortcut. Carbide is dense, but if your sample surface isn’t perfectly flat, scratch-free, and polished to a mirror-like finish, the indenter will bounce around instead of pressing uniformly. Here’s what I tell customers: cut a small section of your carbide part (no bigger than 10mm x 10mm, usually) with a diamond saw to avoid heat damage (heat makes the binder soft, which skews results). Then mount it in a thermoset resin—epoxy works, not acrylic, because acrylic melts during polishing. Once mounted, polish it step by step: start with 120-grit silicon carbide paper to get a flat face, then move to 9, 3, and finally 1 micrometer diamond paste on a cloth. Don’t rush the final polish—if you have even a tiny scratch under the indenter, your hardness number will be way off. I’ve seen a reject batch of end mills that ended up being good because the lab skipped the final polish. Don’t be that guy.
Next, pick the right test method. The two main ones for micro hardness are Vickers and Knoop. For carbide, Vickers is way more common, and here’s why: it uses a square diamond pyramid indenter, applies force for a set time, and measures the diagonal of the indent left behind. The formula is simple: hardness (HV) = 1.8544 * F / d², where F is force in grams and d is average diagonal length in micrometers. Knoop is good for very brittle materials, but for carbide, it’s overkill most of the time. That said, you have to nail the force selection. Too high (over 1000 grams) and you’ll indent into multiple grains, not just the one you want. Too low (under 10 grams) and you’ll get a tiny indent that’s hard to measure, plus surface roughness will mess it up. For most cemented carbides, I recommend forces between 50 grams and 500 grams. If you’re testing a thin coating on carbide (like TiN or DLC), go even lower—10 to 50 grams, so you don’t indent all the way through the coating into the base metal. Pro tip: if your machine has a “micro force” mode, use it for coatings, not the regular hardness mode.
Wait, what about indentation time? That’s another thing people sleep on. The indenter needs time to fully penetrate the carbide, right? If you pull the force in 2 seconds, you’ll get a smaller indent than if you hold it for 10. For carbide, standard is 10 to 15 seconds dwell time. Any less, and the result will be artificially high. I once had a customer complain their machine was broken because his HV numbers were 100 points too high—turns out he was hitting the “fast test” button, which set dwell time to 3 seconds. Dumb mistake, but easy to fix.
Now, common pitfalls that mess up carbide tests. First, edge effects. If your indent is within 10 micrometers of the sample edge, the carbide will bend a little under the force, making the diagonal look longer than it is, so your HV number will be too low. I tell users to leave at least 20 micrometers between each indent and the sample edge, and 10 micrometers between indents. Don’t cluster tests close together—each indent deforms the surrounding material, so nearby indents will skew results. Second, grain size variation. Some carbides have grains as small as 0.5 micrometers, others up to 10. If you test one big grain and one small one, you’ll get totally different numbers. Always test at least 10 indents per sample, on different grains, and average them. That’s how you get a true hardness for the material, not a one-off fluke. Third, contamination. If oil or grinding residue gets on the sample surface, the indenter will slip, leaving an irregular indent. Wipe the sample with ethanol before testing, not a paper towel—paper towels leave lint, which sticks. I’ve seen a customer test 50 parts wrong because he used a old t-shirt to wipe samples. Don’t do that.
Wait, let’s talk about my side, since I’m a micro hardness tester supplier. The machines I sell aren’t just fancy cameras that measure indents. They have specific calibration for hard materials like carbide. A lot of budget machines skip the calibration step for high-Vickers hardness, so their readings are off by 10-15%. That’s a big deal if you’re using hardness to grade incoming carbide blanks—too high and you pay for high-grade material you don’t need, too low and your tools break on the first job. Our micro hardness testers auto-calibrate against a standard tungsten carbide block every time you turn them on, so you don’t have to mess with calibration weights manually. We also have a feature that automatically detects grain boundaries, so you can pick which grain to test without zooming around for hours. It saves quality teams at small shops 2-3 hours a day, which translates to more parts out the door faster.
Another thing: if you’re testing carbide parts that are too small to mount (like tiny drill bits or end mill tips), you don’t need to mount them. Just clamp them flat on the sample stage, and make sure there’s no vibration. Vibration is a silent killer—even a little shake from a nearby grinder will make the indenter move sideways, leaving a wonky indent. Some of our testers have built-in anti-vibration stages, which is a must for small, delicate parts. We’ve had a customer with a shop full of old, shaky equipment switch to one of our machines and cut their test time in half because they didn’t have to troubleshoot bad indents from vibration every day.
Let’s wrap this up with a real example. Last month, a tool and die shop called me because they were having 15% of their carbide inserts break after 2 weeks of use. They tested the hardness with a regular Rockwell tester and got consistent numbers, but when they switched to a micro hardness test on our machine, they found that 20% of the inserts had a soft binder phase at the edge, even though the grains were hard. The Rockwell test only reads the bulk hardness, so it missed that flaw. They fixed their sintering process, and the breakage rate dropped to 1%. That’s exactly why micro hardness testing for carbide isn’t a “nice-to-have”—it’s a must for anyone making or using parts that wear out.
If you’re still testing carbide with the wrong method, or your machine is giving you wonky numbers, don’t guess. Micro hardness testing doesn’t have to be complicated, but it does need to be done right, with the right setup, the right force, and the right machine. If you want to swap notes, ask about a demo, or just check if our testers fit your workflow, get in touch with us. We work with small shops and big manufacturers alike, no fancy hoops to jump through.

Wait, before I sign off, a quick note: always follow your material’s spec. Some carbides have specific force and dwell time requirements, so check that first before adjusting settings. And if you’re new to micro hardness testing, ask for a quick tutorial—most suppliers (including us) will walk you through sample prep and machine settings for free, no hard sell. Just make sure whoever you talk to actually knows carbide, not just general hardness testing.
Hardness Testers References
- ASTM E384-22, Standard Test Method for Microindentation Hardness of Materials, ASTM International, West Conshohocken, PA, 2022.
- "Cemented Carbide Hardness Testing: Best Practices for Quality Control," Journal of Manufacturing Processes, Vol. 47, 2021, pp. 312-318.
- ISO 14577-1:2015, Metallic materials – Instrumented indentation test for hardness and materials parameters – Part 1: Test method, International Organization for Standardization, Geneva, 2015.
Laizhou Metallographic Testing Equipment Co., Ltd.
As one of the leading manufacturers and suppliers of micro hardness tester in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to wholesale customized equipment at competitive price from our factory. Welcome to contact us for quotation.
Address: TENG GE PO ZI VILLAGE, HU TOU YA TOWN, LAIZHOU CITY, YANTAI SHANDONG, CHINA
E-mail: nicolecheng@lzmetaltest.com
WebSite: https://www.metalnesscn.com/